Two ways to burn
Incense comes in two families. Self-burning incense holds an ember once lit: sticks, cones, backflow cones, rope and self-burning powder. You light the tip, let it catch, blow the flame out and let it glow. Resin, wood chips and most loose blends cannot hold an ember, so they rest on a source of heat, usually a charcoal tablet, and release their scent as they warm.
Sticks, cones and backflow
A stick burns for about 30 to 60 minutes and gives a thin, steady thread of smoke. A cone burns faster, about 15 to 30 minutes, with a fuller scent, and its base gets hot, so it needs a heat-proof dish. A backflow cone has a hollow channel that sends the smoke down over a special burner, and it only works in still air, with windows closed while it burns.
Resin on charcoal
Light a quick-light charcoal tablet with tongs, lay it on sand in a heat-proof bowl and wait five to ten minutes until it is grey. Then add a piece of resin the size of a pea. Charcoal is very hot and makes carbon monoxide, so keep a window open and never use it in a small closed room.
A few good habits
Start with one stick or one small pinch, in a room you know. Keep incense away from curtains, shelves and plants, and out of reach of children and pets. Air the room afterwards. Store incense in a dry, closed box, and it keeps its scent for a long time.




