Free delivery over £33 · dispatched from the UK · taxes included

Explore › Incense & smoke

Backflow incense cones

A backflow cone has a hollow channel through its base. Once the ember reaches the channel, the smoke is drawn down through it and pours over a backflow burner like slow water. Each cone burns for about 10 to 20 minutes, and the effect needs still air.

Burn time
about 10-20 minutes
How it is lit
flame at the tip, blown out, set over the burner's hole
Smoke
pours downwards in still air
Backflow incense cones

As a gift

Shop Backflow incense cones

89 products

Why the smoke falls

Inside the cone a narrow channel runs up from the base. When the burning reaches it, smoke is pulled down through the hole rather than rising from the tip, and it leaves the burner as a cooler, heavier stream that runs over the shapes below. It is a small piece of physics, and it is lovely to watch.

Backflow burners come in many shapes: a mountain with a pool, a lotus, a hand, a small waterfall. The cone sits at the top and the smoke finds its own way down. It shows best against a dark wall in soft evening light.

It needs still air

The cascade only holds in a room without draughts. An open window, a fan, a heater or people walking past break it, and the smoke rises like ordinary incense. That is the most common reason a backflow cone seems not to work. Close the window while it burns, then air the room well afterwards.

Burning it well

A backflow cone only flows on a backflow burner, which has a hole for the smoke to pass through. Set the burner on a heat-proof surface, away from curtains. The cone and the top of the burner get hot. Stay in the room while it burns, keep it out of reach of children and pets, and empty the ash only when it is cold.

How to use it

  1. Set the backflow burner on a heat-proof surface in a still corner.
  2. Hold the cone by its base and light the tip until it flames.
  3. Blow the flame out and wait a moment until the tip glows.
  4. Place the cone, hole down, exactly over the hole in the burner.
  5. After a few minutes the smoke begins to fall. Afterwards, air the room.

Frequently asked questions

Why is the smoke from my backflow cone going up?

Usually a draught. Close the window, switch off fans and move the burner away from heaters. It also takes a few minutes: the smoke falls only once the ember reaches the hollow part.

How long does a backflow cone burn?

Most burn for about 10 to 20 minutes. The hollow channel means less material than in a solid cone.

Can I use backflow cones on an ordinary dish?

They will burn, but the smoke will rise. The flowing effect needs a backflow burner with a hole for the smoke.

Can I relight a half-burnt backflow cone?

It rarely flows well a second time, because the channel is already open. It is better to let each cone burn through.

Sources: Wikipedia, Incense; Wikipedia, Censer